Toshiba e-STUDIO353 - Page 78

e-STUDIO350/352/353/450/452/453 © 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 58
672-0 Image Adjustment of
printer image
density
Normal PRT 0
<0-10>
M Adjustment of the
image density.With
decreasing the value,
the text becomes
lighter.
4
672-1 PRT 4
<0-10>
M4
672-2 PRT 5
<0-10>
M4
672-3 PRT 6
<0-10>
M4
672-4 PRT 10
<0-10>
M4
676-0 Image Toner
saving
PRT 0
<0-10>
M4
676-1 PRT 4
<0-10>
M4
676-2 PRT 5
<0-10>
M4
676-3 PRT 6
<0-10>
M4
676-4 PRT 10
<0-10>
M4
693 Image Range correc-
tion on origi-
nal set on the
RADF
Text/Photo PPC EUR: 12
UC: 12
JPN: 22
<11-14,
21-24,
31-34,
41-44>
SYS Sets whether the val-
ues of the background
peak and text peak are
fixed or not. One’s
place is an adjustment
for “automatic density”
and ten’s place is for
“manual density”. Once
they are fixed, the
range correction is per-
formed with standard
values.
The values of the back-
ground peak and text
peak affect the repro-
duction of the back-
ground density and text
density respectively.
1: fixed/fixed
2: varied/fixed
3: fixed/varied
4: varied/varied
* Background peak/
Text peak
1
694 Photo PPC 12
<11-14,
21-24,
31-34,
41-44>
SYS 1
695 Text PPC 22
<11-14,
21-24,
31-34,
41-44>
SYS 1
700 Image Adjustment of
binarized
threshold
(Text)
Center
value
FAX 120
<0-255>
SYS When the value
increases, the image at
the center step
becomes lighter.
1
701 Light step
value
FAX 20
<0-255>
SYS When the value
increases, the image of
“light” side becomes
lighter.
1
702 Dark step
value
FAX 20
<0-255>
SYS When the value
increases, the image of
“dark” side becomes
darker.
1
Adjustment mode (05) <e-STUDIO350/450>
Code
Classifi-
cation
Items
Func-
tion
Default
<Accept-
able
value>
RAM Contents
Pro-
cedur
e