Toshiba e-STUDIO353 - Page 179

e-STUDIO350/352/353/450/452/453
PAPER FEEDING SYSTEM
9
9 - 13 © 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Fig. 9-413
Fig. 9-415
Fig. 9-414
Fig. 9-416
(A-4) Bypass pickup solenoid
(1) Take off the bypass unit ( Chapter 9.4 (A-1)).
(2) Remove 1 screw and slide the bypass feed
upper cover to take it off.
(3) Remove 4 screws and take off the upper
plate.
(4) Disconnect 1 connector, remove 1 spring
and take off the bypass pickup solenoid with
the solenoid arm.
Screw
SFB board
Screw
Bypass feed upper cover
Screw
Bypass pickup
solenoid
Spring
Solenoid arm
Upper plate
(6) Disconnect 1 connector, remove 1 screw
and take off the SFB board.