Registering Scan Template 85
10
Press the [FUNCTION CLEAR] button on the control panel to clear
the settings in the scan menu.
Registering a scan template in a user template group
1
Press the [SCAN] button on the control panel to enter the scan
menu.
y The basic scan menu is displayed.
2
Press the buttons of the agent and set the scanning conditions.
y For instructions on how to set each scan agent, see the instructions for each scan
mode.
P.28 “How to Perform Scan to e-Filing”
P.40 “How to Perform Scan to File”
P.52 “How to Perform Scan to E-mail”
Do not press the [SCAN!] button at this time.
To Next Page
Loading...
