5 Using Template
86 Registering Scan Template
3
Press the [TEMPLATE] button on the control panel to enter the tem-
plate menu.
y The screen to select a template group is displayed.
4
Press the [REGISTRATION] button.
5
Select the user template group name where you want to register a
new template, and press the [ENTER] button.
y When you press the user template group button with no password set, the screen to
select a template is displayed. If the screen to select a template is displayed, skip to
Step 7.
y If a password has been set for the selected user template group, the password input
screen is displayed. If the password input screen is displayed, continue to the next
step.
If you cannot find the desired user template group button in the screen, press the [Next]
button to switch the screen to find the desired user template group button.
To Next Page
Loading...
