Toshiba e-STUDIO400AC - Drawers; Large Capacity Feeder

1.TROUBLESHOOTING FOR THE HARDWARE
22 Clearing a Paper Misfeed
 Drawers
 Drawer or Paper Feed Unit
1
Open the paper source drawer, and remove the misfed paper.
2
Check that the guide width is correct, there is no folded/curled paper or overloading (especially
for thick paper), and then close the drawer.
Be sure that the height of the stacked paper does not exceed the line indicated inside of the side guides.
In particular, be sure that the upper limit for envelope is not exceeded when placing envelope in the Drawer. The
amount of envelope you can load in the drawer is lower than that for plain paper.
 Large Capacity Feeder
1
Open the drawer of the Large Capacity Feeder.