Toshiba e-STUDIO400AC - Replacing the Waste Toner Box

Replacing the Waste Toner Box 37
TROUBLESHOOTING FOR THE HARDWARE
0.Replacing the Waste Toner Box
When the waste toner box becomes full, the symbol for replacement of the waste toner box blinks and the message
“Dispose of used toner” appears. Replace the waste toner box following the procedure below.
The guidance is displayed on the touch panel. Press or to scroll the pages.
Never attempt to incinerate waste toner boxes.
Dispose of used toner cartridges and waste toner boxes in accordance with local regulations.
Do not touch the switches inside the equipment. This could cause a malfunction.
1
Open the front cover of the equipment.
2
Turn the green lever to the unlock position.