42 Cleaning the Inside of the Equipment
0.Cleaning the Inside of the Equipment
When the inside of the equipment needs to be cleaned, the message “Time for cleaning. Open the front cover and
follow the guidance.” is displayed. In this case, clean the inside of the equipment following the guidance displayed on
the touch panel.
In addition to this, even if this message is not displayed, perform cleaning when the copied images are uneven and/or
have white or color streaks in the horizontal direction.
Do not touch the switches inside the equipment. This could cause a malfunction.
The main chargers and LED print heads
1
Open the front cover of the equipment.
2
Pull out the green cleaner until it stops and then return it. Repeat this 3 times for each of the 4
colors.
The cleaner cannot be removed by design. Pulling it out forcibly may cause malfunction.
When only the main chargers need to be cleaned, steps 3 to 13 are unnecessary. Proceed to step 15.
3
Turn the green lever to the unlock position.
To Next Page
Loading...
