Toshiba e-Studio477s - Page 123

TEMPLATES
- 123 -
2
1
3
4
5
6
7
3
Press [TEMPLATE] on the touch panel.
The template menu appears.
4
Press the button for the group to which the
desired template is registered.
You can also select the group by keying in its group
number (3 digits).
To switch the menu
Press or .
5
Key in the password when you have
selected the private group. (If no password
is set, go to step 6.)
1) Press [PASSWORD] and then enter the password
with the buttons on the touch panel or the digital
keys on the control panel.
2) Press [OK].
6
Press the button for the desired template.
To switch the menu
Press or .
Templates with the automatic start function enabled can
be identified with . If this mark is displayed, you can
press it to immediately start the operation of the functions
set in the template.
7
Key in the password for the selected
template. (If no password is set, go to step
8.)
1) Press [PASSWORD] and then enter the password
with the buttons on the touch panel or the digital
keys on the control panel.
2) Press [OK].
8
Confirm that “Updated the template
setting” is displayed on the touch panel.
The message is displayed for approx. 3 seconds.