Toshiba e-Studio477s - Pull Out the Orange Stopper from the Fuser Unit; Close the Top Cover; Close the Front Cover; Return the Document Holder to Its Original Position

CONFIRMING JOB STATUS
- 30 -
2
1
3
4
5
6
7
Confirming drawers
You can confirm the size and type-setting of the paper or the
amount remaining in the drawers. During printing you can
confirm which drawer is feeding paper.
1
Press [JOB STATUS] on the touch panel.
2
Press the [SUPPLY] tab.
During printing, the button for the drawer from which the
paper is fed is highlighted.
Press [CLOSE] when you finish the confirmation. The
menu returns to the one shown before you pressed [JOB
STATUS].
When the paper in the drawer has run out during printing, [JOB
STATUS] on the touch panel blinks. In this case, press [JOB
STATUS] so that the menu for displaying the printing status will
appear and the button for the drawer whose paper has run out
will blink on this menu. Printing resumes when you add paper
to this drawer.
Confirming amount of toner remaining
You can confirm the approximate amount of toner remaining in
the toner cartridge.
1
Press [JOB STATUS] on the touch panel.
2
Press the [TONER] tab.
Press [CLOSE] when you finish the confirmation. The
menu returns to the one shown before you pressed [JOB
STATUS].