SPECIFICATIONS
- 256 -
Scanning Specifications
Inner Finisher
Operating environment • When in operation: 10 - 32°C / Relative Humidity of 20 - 80% (maximum wet bulb temperature of 25°C, maximum
dry bulb temperature of 2°C)
• When not in operation: 0 - 43°C / Relative Humidity of 10 - 90% (maximum wet bulb temperature of 26.8°C,
maximum dry bulb temperature of 2°C)
Conditions for the guarantee
of print quality
Operating Range:
Temperature 10°C, humidity 20 to 80% RH
Temperature 32°C, humidity 20 to 60% RH
Humidity 20% RH, temperature 10 to 32°C
Humidity 80% RH, temperature 10 to 27°C
Consumables, Maintenance
Unit
Toner cartridge, image drum, belt unit, fuser unit
Type Flat surface scanning system
(When the Reversing Automatic Document Feeder is installed: Fixed scanning system by feeding the original)
Image Sensor Color CIS
ADF paper weight
52-105 g/m
2
ADF paper capacity
100 sheets (80 g/m
2
) A4/LT
50 sheets (except 80 g/m
2
) A4/LT/B5/A5
Acceptable size Document Holder : Max. 297mm
ADF : Max. 297 mm Min. 128.5 x 148.5 mm
Feeding speed 52 sheets/min. (Gray Scale, 600 dpi)
Unit life Document Holde : 5 years or 300,000 times for page scanning
ADF : 5 years or 120,000 times for page scanning
Florescent life 1,000 hours
Model name MJ-1038 (For e-STUDIO477S/527S)
Type Inner Finisher
Power source Supplied from the equipment
Dimensions 388.1 mm (15.28") (W) x 305.8 mm (12.04") (D) x 213.4 mm (8.40") (H) (Excluding the tary)
Weight Approx. 9 kg (19.84 lb.)
Power consumption 40 W max.
To Next Page
Loading...
