2 RECOMMENDED INSTALLATION
32 Procedure for Recommended Installation
7
When the installation is complete, click [Finish].
The main menu is displayed.
The Installer may ask you to restart your computer. If it does, select “Yes, I want to restart my
computer now.” and click [Finish] to restart your computer.
8
Click [Exit].
When a message “Do you want to close TOSHIBA e-STUDIO Software Installer?” appears asking
whether to finish the installation, click [Yes].
Before using the Universal Printer 2 driver for printing, configure the installed options of the
equipment and department code (if required) on the printer driver. Refer to the Printing Guide for
the instructions.
To Next Page
Loading...
