3
Three Wire Control
Introduction
The G7 can be programmed to allow three-wire start/stop functionality without the use of an external
relay. Note that the pushbuttons utilized are momentary. The switch “S3” determines direction.
When S3 is closed, it is in reverse direction, when opened, forward direction.
The following programming example will demonstrate how to set up a G7 to function as a three-wire
control operator.
* For additional assistance, please contact Toshiba Adjustable Speed Drive Marketing Dept. at (800) 872-2192
17
efesotomasyon.com -Toshiba inverter,drive,servo,plc
To Next Page
Loading...
