196 Appendix B H7 ASD Operation Manual
Appendix B
H7 Adapter Mounting Plates
The optional H7 mounting plates may be used when replacing a G3 ASD with the H7 ASD. The mounting
plates are fitted with permanently attached nuts for securing the H7 ASD to the adapter plate. The
perimeter mounting-hole dimensions of the adapter plate allow the adapter plate to be mounted using the
existing cabinet (or wall) holes.
Listed below are the device types that require an adapter plate and their associated adapter plate. The
adapter plate dimensions are shown on pg. 197 – 199.
Note: Units not listed do not require an adapter plate.
H7 Model
Adapter Plate
Number
H7 Model
Adapter Plate
Number
2035
51761
2080
51762
2055 4110
4055 2270
51764
4080 2330
2110
51763
4330
2160 4400
2220 4500
4160 6160
4220 4600 51769
4270 6120 51770
6060 — —
www . ElectricalPartManuals . com
To Next Page
Loading...
