Toshiba MMY-MAP0804HT5P - Page 222

– 221 –
(2)Display of Outdoor Unit Information (Displayed on Each Outdoor Unit)
liated yalpsiD30WS20WS10WS
1
1
1
]4U[ ot ]1U[ :.oN tinu roodtuOAatad rorrE
B Check code (only latest one displayed)
If there is no check code, [– – –] is displayed.
If there is sub-code, check code [
] and sub-code [– ] are displayed
alternately, for 3 seconds and 1 second, respectively.
<SW04> push SW function: Fan operation at outdoor unit with error. 7-segment display section A: [E.1]
<SW04 + SW05> push SW function: Fan operation at outdoor unit without error. 7-segment display section A: [E.0]
<SW05> push SW function: Fan operation function check mode is cancelled.
2
–A–
B–
3
Operation mode A Stop [… …]
Normal cooling: [… C], Normal heating: [… H], Normal defrosting: [… J]
B–
4
Outdoor unit HP capacity A 8HP: [… 8], 10HP: [… 10], 12HP: [… 12],
14HP: [14], 16HP: [16]
B[…HP]
5
Compressor operation command * Operation data of each compressor is displayed in turn in 2 second intervals.
If compressor No. 3 does not exist, [– –.– – –] is displayed.
Normal: Compressor speed (rps) is displayed in decimal format.
7-segment display (A/B): [C1.
] [C2. ] [C3. ] ...
<SW04> push SW function: Switches to display of operating current (decimal value).
7-segment display (A/B): [i1.
] [i2. ] [i3. ] ...
Pressing of <SW05> restores normal display.
6
Outdoor fan mode A [FP]
B Mode 0 to 63: [… 0] to [63]
7
Compressor backup A [C.b.]
B Displays compressor backup setting status
Normal: [… … …]
Compressor No. 1 backup: [1 … …]
Compressor No. 2 backup: [… 1 …]
Compressor No. 3 backup: [… … 1]
8
–A–
B–
9
Control valve output data Displays control output status of solenoid valve A B
… … …1 .HFFO :2 evlav yaw-4 / NO :evlav yaw-4
… … …0 .HNO :2 evlav yaw-4 / FFO :evl
av yaw-4
10
0 0 1… .2FFO :6VS / FFO :5VS / NO :2VS
0 1 0… .2NO :6VS / NO :5VS / FFO :2VS
1 0 0… .2NO :6VS
/ FFO :5VS / FFO :2VS
11
SV3A: ON / SV3B: OFF / SV3C: OFF / SV3D: OFF 3. 1 0 0 0
SV3A: OFF / SV3B: ON / SV3C: OFF / SV3D: OFF 3. 0 1 0 0
SV3A: OFF / SV3B: OFF / SV3C: ON / SV3D: OFF 3. 0 0 1 0
SV3A: OFF / SV3B: OFF / SV3C: OFF / SV3D: ON 3. 0 0 0 1
12
0 0 1… .4FFO :34VS / FFO :24VS / NO :14VS
0 1 0… .4FFO :34VS / NO :24VS / F
FO :14VS
1 0 0… .4NO :34VS / FFO :24VS / FFO :14VS
13
0 … …… .AFFO :F3VS
1 … …… .ANO :F3VS
14 PMV1/PMV2 opening Displays opening data in decimal format (total opening)
. P
…tamrof lamiced ni atad gninepo syalpsiDgninepo 4VMP51
. P
16
Oil level judgment status
].L o[AlamroN
B Initial display: [… … …], Oil level judgment result: [#.
.$]
Displayed letters #,
and $ represent judgment results for compressor Nos.
1, 2 and 3, respectively (“0” for normal and “1” or “2” for low level).
<SW04> push SW function: Displays low level confirmed judgment result of each compressor.
* Pressing of <SW05> restores
normal display.
A [L d.]
B Compressor No. 1 low level being confirmed: [L … …]
Compressor No. 2 low level being confirmed: [… L …]
Compressor No. 3 low level being confirmed: [… … L]