Toshiba MW20FM1 - TV Operation; Basic TV Controls

Operation
: :
'1 To turn on the unit, press POWER.
POWER
Press TV/VCR to select the TV/VCR mode.
TV/VCR
Adjust the volume level by pressing VOLUME
&crY.
The volume level will be indicated
Q on the screen by green bars. As
the volume level increases, so do
"VOLUME
the number of bars. If the volume
Q decreases, the number of green
bars also decreases.
I VOLUME 32
Set TV/CATV menu to the appropriate position
(See page 26).
TV - VHF/UHF channels
CATV - CABLE _ channels
5
Press the Direct channel selection buttons to
select the channel.
TV mode direct channel selection -
When TV/CATV menu is in the TV position, all
channels can be instantly selected by using two
buttons. (for example, to select channel 2, press
"0", then "2". If you press only "2", channel selection
will be delayed for two seconds.) For channels 10
and above, press the 2 digits in order.
CATV mode direct channel selection -
When TV/CATV menu is in the CATV position,
channels can be selected as follows:
TO SELECT CATV CHANNELS:
1-9 Press "0" twice, then 1-9 as needed.
Example, to select channel 2, press "002".
10-12 Press "0", then the remaining 2 digits.
Example, to select channel 12, press "012".
13-99 Press the 2 digits in order. Example, to
select channel 36, press "36".
100-125 Press the 3 digits in order. Example, to
select channel 120, press "120".
NOTE FOR CHANNELS 1-12:
If only 1 or 2 buttons are Dressed, the correspond-
mg channel will be selected in 2 seconds.
Ocb
CH012 I
Notes:
• If a channel with no
broadcast is selected.
the sound will
automatically be
muted.
• If a station being
viewed stops
broadcasting, the TV
will automatically shut
itself off after 15
minutes.
VHF/UHF/CATV CHANNEL, <
TV CATV
VHF VHF
2-13 2-13
UHF STD/HRC/IRC
14-69 14-36
(A) (W)
37-59
(AA) (WW)
60-85
(AAA) (ZZZ)
86-94
(86) (94)
95-99
(A-5) (A- 1)
100-125
(100) (125)
01
(5A)
O
O
,-,1
231