EasyManua.ls Logo

Toshiba MW26G71 - To memorize channels

Toshiba MW26G71
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28
Select the desired channel to be added or
deleted using Direct channel selection buttons
(0–9) or
CH or
.
2
Press MENU in the TV/VCR mode, then press
or to select TV SETUP menu.
Press or to select “TV/CABLE”.
1
2
Press RETURN to make the menu screen
disappear.
4
Press
or
to select “TV” or “CABLE”.
3
TV - VHF/UHF channels
CABLE - Cable TV channels
Cable TV chart
The chart below is typical of many cable TV system channel
allocations.
TV/CABLE selection
To memorize channels
This unit is equipped with a channel memory feature which allows
channels to skip up or down to the next channel set into memory,
skipping over unwanted channels. Before selecting channels, they
must be programmed into the unit’s memory. In addition to normal
VHF and UHF channels, this unit can receive up to 113 cable TV
channels. To use this unit with an antenna, set the TV/CABLE
selection to the TV position. When shipped from the factory, this
selection is in the CABLE position.
To ADD/ERASE channels
Press MENU in the TV/VCR mode, then press or
to select TV SETUP menu. Press or to
select the “CH PROGRAM”, then press
.
The TV will begin memorizing all the
channels available in your area.
Automatic memory tuning
1
Press or to select “ADD” or “ERASE”,
whichever function you want to perform.
3
0–9
MENU
/ / /
TV SETUP
LANGUAGE ENGLISH
CLOCK SET
AUTO CLOCK ON
STANDARD TIME
DAYLIGHT
SAVING TIME AUTO
: SELECT : ADJUST
RETURN : END
 
 
 
 
 
 
  
 
 
 
TV SETUP
TV/CABLE TV/CABLE
CH PROGRAM
ADD/ERASE ADD
PICTURE SIZE
PICTURE SCROLL
CINEMA MODE VIDEO
ASPECT ON
: SELECT : ADJUST
RETURN : END
TV SETUP
TV/CABLE CABLE
CH PROGRAM
ADD/ERASE ADD
PICTURE SIZE
PICTURE SCROLL
CINEMA MODE VIDEO
ASPECT ON
: SELECT : ADJUST
RETURN : END
Press MENU in the TV/VCR mode, then press
or to select TV SETUP menu.
Press
or to select “ADD/ERASE”.
TV SETUP
TV/CABLE CABLE
CH PROGRAM
ADD/ERASE ADD/ERASE
PICTURE SIZE
PICTURE SCROLL
CINEMA MODE VIDEO
ASPECT ON
: SELECT : ADJUST
RETURN : END
Repeat steps 1-3 for other channel you want to
add or erase.
4
TV operation
RETURN
CH
/
5U30101B [E]p24-30 4/1/05, 3:24 PM28

Table of Contents

Other manuals for Toshiba MW26G71

Related product manuals