43
TV operation
TV SETUP
TV/CABLE CABLE
CH PROGRAM
ADD/ERASE ADD
PICTURE SIZE
PICTURE SCROLL
CINEMA MODE VIDEO
ASPECT ON
: SELECT : ADJUST
RETURN : END
SCROLL ADJUSTMENT 0
ENTER:SET
: TO ADJUST
SCROLL ADJUSTMENT 0
: TO ADJUST
ENTER:SET
SCROLL ADJUSTMENT +20
: TO ADJUST
ENTER:SET
SCROLL ADJUSTMENT -10
: TO ADJUST
ENTER:SET
Picture scroll/Selecting the cinema mode/
Using the ASPECT feature
Press MENU in the TV/VCR mode, then press
or to select TV SETUP menu, then
press
or to select “PICTURE SCROLL”.
1
2
Press PIC SIZE to select the TheaterWide 2 or 3
mode.
Press or to display the Scroll Adjustment
mode.
3
Press or to display the vertical position
of picture.
4
•To raise the picture,
press
.
•To lower the picture,
press
.
• Normal (center)
position.
Picture scroll
Selecting the cinema mode
When you view a DVD movie, smoother and more natural
motion can be obtained by setting the CINEMA MODE to
FILM. This function can be setting on the ColorStream HD
and HDMI input only.
Press MENU in the TV/VCR mode, then press or
to select TV SETUP menu. Press or to
select “CINEMA MODE”, then press
or to
select “FILM” or “VIDEO”.
Using the ASPECT feature
Press MENU in the TV/VCR mode, then press
or to select TV SETUP menu. Press or
to select “ASPECT”, then press or to
select “ON” or “OFF”.
When the ASPECT feature is set to ON and the TV receives a
480i signal, the picture size is automatically selected (as
described in the following table).
Aspect ratio of signal source
4:3 Normal
16:9 Full
4:3 Letter box
Not defined
Automatic aspect size
(automatically selected
when ASPECT is ON)
Natural
Full
TheaterWide 2
User-set mode
Note:
If the signal does not include aspect information, the
picture size you selected is displayed
"
.
MENU
PIC SIZE
/ / /
Note:
You can scroll the picture in TheaterWide 2 and TheaterWide
3 only. The scroll amounts are as follows:
• 480i/480p signal source:
Wide 1 : Not adjustable
Wide 2 : -10 to +20
Wide 3 : -10 to +20
5U30101B [E]p41-45 4/1/05, 3:26 PM43
To Next Page
Loading...
