Toshiba Portege R600 - Page 253

4.10 3G card/Wireless LAN card 4 Replacement Procedures
5. Turn up the insulator and disconnect three (or two) wireless LAN antenna cables
from the connectors on the wireless LAN card.
6. Remove the following screws and disconnect the wireless LAN card from the
connector on the system board.
• M2×4C S-THIN HEAD screw ×2
Wireless LAN card
M2×4C S-THIN HEAD
Insulator
Wireless LAN antenna cable (white)
Wireless LAN antenna cable (black)
Wireless LAN card
M2×4C S-THIN HEAD
Insulator
Wireless LAN antenna cable (white)
Wireless LAN antenna cable (gray)
Wireless LAN antenna
cable (black)
Figure 4-12 Removing the wireless LAN card
PORTÉGÉ R600 Maintenance Manual (960-709) [CONFIDENTIAL] 4-25