4 Replacement Procedures 4.20 System board
4.20 System board
CAUTION: When replacing with a new system board, the following procedures must
be executed.
(1) Before replacing the system board, execute subtest02 “DMI
ggginformation save” in 3.3 Setting of the hardware configuration of
gggChapter 3 Test program in order to save the DMI information from
gggsystem board to floppy disk.
(2) After replacing the system board, execute the subtest03 “DMI
ggginformation recovery” and subtest01 “Entry of the DMI information”
gggin order to copy the DMI information and system configuration
ggginformation.
(3) Also update the BIOS and EC/KBC with the latest ones according to
the steps described in Appendix G and Appendix H.
When removing/installing the system board, handle with the area C and D,
and do not handle with the area A and B.
4-48 [CONFIDENTIAL] PORTÉGÉ R600 Maintenance Manual (960-709)
To Next Page
Loading...
