Toshiba Portege R600 - Page 283

4.22 Cover assembly/LCD assembly 4 Replacement Procedures
2. Open the display 90 degrees and put the computer on the stand.
3. Remove the following screws and separate the cover assembly and LCD assembly.
• M2.5×4B FLAT HEAD ×2
M2.5x4B FLAT HEAD
LCD assembly
M2.5x4B FLAT HEAD
Cover assembly
Figure 4-31 Removing the cover assembly/LCD assembly (2)
PORTÉGÉ R600 Maintenance Manual (960-709) [CONFIDENTIAL] 4-55