4.24 Keyboard 4 Replacement Procedures
PORTÉGÉ R600 Maintenance Manual (960-709) [CONFIDENTIAL] 4-63
Installing the Keyboard
To install the keyboard, follow the steps below and refer to Figure 4-36.
NOTE: Do not reuse the removed keyboard and insulator. Use new keyboard and
insulator.
Wipe off the double-sided tapes on the cover assembly and stick new double-
sided tapes.
1. Wipe off the double-sided tapes on the cover assembly.
2. Stick a new insulator (INSULATOR KB) on the cover assembly.
3. Stick a new keyboard on the insulator.
4. Stick the aluminum tape (AL TAPE) on the back of the cover assembly.
To Next Page
Loading...
