4.25 LCD 4 Replacement Procedures
3. Turn up the insulator and remove the LCD from the LCD cover.
4. Peel the insulator (HNS CONN INSULATOR) and disconnect the LCD harness
from the connector on the LCD.
CAUTION: When disconnecting the LCD harness from the LCD unit, peel off the
adhered portion of the LCD harness very carefully. Otherwise, the
connector of the LCD harness or LCD may be broken.
Figure 4-38 Removing the LCD
LCD
LCD harness
Cushion
Insulator
LCD cover
Insulator
(HNS CONN INSULATOR)
PORTÉGÉ R600 Maintenance Manual (960-709) [CONFIDENTIAL] 4-65
To Next Page
Loading...
