104
Exploring Your Device’s Features
Setting up for communications
2 Click or touch Settings ( ) in the Start menu.
3 Select
Network & Internet ( ) in the Settings window.
The Network & Internet window allows you to choose
from several options in the left pane of the window:
❖ Wi-Fi
❖ Airplane mode
❖ Data usage
❖ VPN
❖ Dial-up
❖ Proxy
❖ Ethernet
4 To set up your Wi-Fi connection, select
Wi-Fi.
5 Select your network.
6 Select the
Connect automatically checkbox to
automatically connect to the selected network on
startup.
7 Click or touch
Connect.
8 Enter the network security key, (if applicable).
9 Click or touch
Close ( ) to save the changes and close
the window.
Your device should then be connected.
To enable/disable the wireless antenna, press the
FN + ( ) keys or use the Airplane mode switch
located under Networks.
For help with common Wi-Fi networking problems, see
“Wireless networking problems” on page 145.
NOTE
To Next Page
Loading...
