141
If Something Goes Wrong
Sound help
Check and set default speakers
1 In the Search field, type Change system sounds.
2 Click or touch
Change system sounds.
3 Click or touch the
Playback tab.
4 Select a playback device.
5 Click or touch the
Set Default button.
If only one playback device is listed, that device is set as
the default automatically.
6 With the default playback device selected, click or touch
the
Configure button.
(Sample Image) Speaker Setup window
7 Click or touch Stereo in the “Audio channels” box.
If “Stereo” is not available select any other available
option.
8 Click the
Test button to send sound to each speaker, or
click an individual speaker to send sound to it.
9 If sound is heard correctly from each speaker, your
speaker setup is complete.
10 If no sound is heard from all or one of the speakers, or if
the configuration type was changed, continue with the
speaker setup by clicking
Next. Follow the on-screen
instructions to complete the speaker setup.
NOTE
NOTE
To Next Page
Loading...
