Q9 ASD Installation and Operation Manual 41
Program Mode Menu Navigation
The following table lists the menu items of the Program mode and maps the flow of the menu
selections. The Parameter Numbers for the listed functions are provided where applicable.
The functions listed may be viewed, or selected and changed as mapped below or via the Direct Access
method: Program Direct Access Applicable Parameter Numbers.
Program Mode Menu Navigation
Primary Menu Sub Menu Parameter Name
Parameter
Number
OUTPUT FREQUENCY
N/A
SETUP
Setup
Acceleration Time 1 F009
Decel Time 1 F010
Upper-Limit Frequency F012
Lower-Limit Frequency F013
V/I Reference 1 F201
V/I Frequency 1 F202
V/I Reference 2 F203
V/I Frequency 2 F204
Type Reset F007
V/f Pattern F015
Electronic Thermal Protection 1 F600
PID SETUP
PID Setup
Command Mode F003
Frequency Mode 1 F004
V/I Reference 1 F201
V/I Frequency 1 F202
V/I Reference 2 F203
V/I Frequency 2 F204
PID Switching F359
To Next Page
Loading...
