– 24 –
CAUTION:
When you select the timer operation, the remote
controller automatically transmits the timer signal
to the indoor unit at the specified time. Therefore,
keep the remote controller in a location from which
it can transmit the signal to the indoor unit properly.
Changing
• Push the ON or OFF TIMER button once.
• The indication of set time will start flashing.
• Perform steps (1) and (2) to change the set-
ting.
(2) ON TIMER (Stop
∅∅
∅∅
∅ Operation)
The ON TIMER feature is useful when you wake
up in the morning or when you return home. The
air conditioner will automatically start operating
at the time set.
Example:
To turn on the air conditioner 5 hours later.
1) Continue pushing the “ON” TIMER button un-
til you get “5.0”.
2) Push the RSV button.
Fig. 8-14
8-8-2. Example of Timer Setting
(1) OFF TIMER (Operation
→→
→→
→ Stop)
The OFF TIMER feature is useful when you go
to sleep. The air conditioner will stop automati-
cally at the time set.
Example:
To turn off the air conditioner 7 hours later.
1) Continue pushing the “OFF” TIMER button
until you get “7.0”.
2) Push the RSV button.
Fig. 8-13
Hr. OFF TIMER
7.0 hr
Operation
Stop
5.0 hr.
Stop
Operation
Hr. ON TIMER
To Next Page
Loading...
