Need help?Do you have a question about the Toshiba RAS-10BAV-E1 and is the answer not in the manual?
General| Type | Split System |
|---|---|
| Cooling Capacity | 2.5 kW |
| Heating Capacity | 3.2 kW |
| Refrigerant | R410A |
| Power Supply | 220-240V, 50Hz |
| Energy Efficiency Ratio (EER) | 3.21 |
| Coefficient of Performance (COP) | 3.61 |
| Outdoor Unit Dimensions (W x H x D) | 660 x 530 x 240 mm |
| Indoor Unit Weight | 9 kg |
Safety guidelines for installation, handling, and general use of the air conditioner.
Detailed technical specifications for indoor and outdoor units, including performance data.
Guidelines for safe installation, piping, brazing, and handling of R410A refrigerant.
Schematic illustrating the electrical connections between indoor and outdoor units.
Diagram showing refrigerant flow and operational data for cooling and heating.
Diagrams illustrating the control logic and functions of indoor and outdoor units.
Methods for adjusting capacity, protective controls, and defrost operations.
Procedures to set, cancel, and handle auto restart after power loss.
Introduces troubleshooting procedures and highlights precautions for handling the new inverter.
Safety measures and procedures for inspecting the outdoor unit's control section.
Mapping indoor unit LED flashing patterns to self-diagnosis results.
Guide on using the remote controller in service mode to perform self-diagnosis.
Detailed breakdown of check codes, causes, and actions for indoor unit issues.
Troubleshooting for issues related to serial signals between indoor and outdoor units.
Actions for diagnosing issues related to the outdoor PC board and compressor.
Troubleshooting for compressor drive errors and other unit faults.
Diagnosing compressor issues like high current and sensor errors.
Step-by-step troubleshooting for cases where the indoor unit does not receive power.
To Next Page