Do you have a question about the Toshiba RAS-10BKS-HK and is the answer not in the manual?
Type | Split System |
---|---|
Power Supply | 220-240V, 50Hz |
Refrigerant | R410A |
Energy Efficiency Ratio (EER) | 3.21 |
Coefficient of Performance (COP) | 3.61 |
Outdoor Unit Dimensions (W x H x D) | 660 x 530 x 240 mm |
Indoor Unit Weight | 9 kg |
Outdoor Unit Weight | 23 kg |
Critical safety warnings to prevent severe injury or death.
Safety warnings to prevent serious injury or death.
Safety warnings to prevent minor injury or property damage.
Lights for Hi Power, Filter, Fan-Only, Timer, and Operation status.
Button to reset the unit or clear settings.
Instructions for opening the grille and attaching air filters.
Guide for inserting batteries into the wireless remote control.
Steps to set the current time on the remote control.
Procedure to reset the remote control to its default settings.
How to move the louver for desired vertical direction.
How to manually adjust airflow direction horizontally.
Identification of buttons and parts on the wireless remote control.
Description of the automated operation customized for user preferences.
How to memorize and operate preferred settings for future use.
How to set or cancel the auto restart function after power failure.
How to activate super low fan speed for quiet operation.
How to set airflow and auto-off timer for comfortable sleep.
How to reset the filter indicator light after cleaning.
Instructions for cleaning the unit and remote control with a wet cloth.
How to activate fan operation to reduce indoor unit moisture.
Recommended outdoor and room temperatures for Cooling and Dry modes.
Common reasons and checks when the unit fails to start.
Potential causes and checks for reduced cooling performance.
Steps to set a remote control for a second indoor unit.
How to memorize and recall preferred settings for future use.
Procedure to set or cancel auto restart after power interruption.
How to activate super low fan speed for quiet operation.
How to set airflow and auto-off timer for comfortable sleep.
How to reset the filter indicator light after cleaning.
Instructions for cleaning the indoor unit and remote control.
How to activate fan operation to reduce indoor unit moisture.
Recommended outdoor and room temperatures for Cooling and Dry modes.
Common reasons and checks when the unit fails to start.
Potential causes and checks for reduced cooling performance.
Steps to set a remote control for a second indoor unit.