Toshiba RAS-10PAVP-ND User Manual (English)

Other manuals for Toshiba RAS-10PAVP-ND

Service Manual114 pages

Installation Manual26 pages

Questions and Answers:

D
Douglas NobleAug 7, 2025
What to do if my Toshiba RAS-10PAVP-ND Air Conditioner is not turning on?
- D
  Derek JonesAug 7, 2025
  If your Toshiba Air Conditioner is inoperative, there are several possible reasons. First, ensure that the main power switch is turned on. Also, check if the circuit breaker has been activated, cutting off the power supply, and reset it if necessary. Examine the main power fuse and replace it if it has blown. Verify that there is an electric current. Replace the batteries in the remote controller. If the ON timer is set, disable it. Finally, remember that as a protective measure, the air conditioner may not operate for 3 minutes after restarting or turning on the main power; wait for 3 minutes and try again.
M
Melissa StephensAug 16, 2025
Why is my Toshiba RAS-10PAVP-ND Air Conditioner not cooling properly?
- R
  Ronald JonesAug 16, 2025
  If your Toshiba Air Conditioner isn't cooling effectively, several factors could be responsible. Check that the air inlet or outlet of the outdoor unit isn't blocked. Ensure all doors and windows are closed. A clogged air filter can also reduce performance, so clean it. Make sure the louver is correctly positioned. Check that the fan speed isn't set too low, and adjust it as needed. The air conditioner might be in DRY or SLEEP mode, so switch to a more suitable setting. If you are in cooling operation, the temperature setting might be too high, so lower it. Finally, ensure that the air conditioner is being used within its specified operating conditions. If none of these steps work, remove the cause of the problem, and after about 30 seconds, turn on the circuit breaker again.
T
Troy TaylorAug 28, 2025
What to do if my Toshiba Air Conditioner is not heating properly?
- A
  asandovalAug 28, 2025
  If your Toshiba Air Conditioner isn't heating effectively, several factors could be responsible. Check that the air inlet or outlet of the outdoor unit isn't blocked. Ensure all doors and windows are closed. A clogged air filter can also reduce performance, so clean it. Make sure the louver is correctly positioned. Check that the fan speed isn't set too low, and adjust it as needed. The air conditioner might be in DRY or SLEEP mode, so switch to a more suitable setting. If you are in heating operation, the temperature setting might be too low, so increase it. Finally, ensure that the air conditioner is being used within its specified operating conditions. If none of these steps work, remove the cause of the problem, and after about 30 seconds, turn on the circuit breaker again.

Toshiba RAS-10PAVP-ND Specifications

General

Brand	Toshiba
Model	RAS-10PAVP-ND
Category	Air Conditioner
Language	English

Summary

Precautions for Safe Operation

Safety Warnings and Prohibited Actions

Details critical safety warnings, dangers, and actions to avoid.

Usage and Installation Precautions

Covers safe installation locations and usage guidelines.

Component Identification

Outdoor Unit Parts

Lists and identifies components of the outdoor unit.

Indoor Unit Parts

Lists and identifies components of the indoor unit.

Indoor Unit Controls and Indicators

Indoor Unit Display Panel

Explains the indicators and their meanings on the indoor unit display.

Indoor Unit Reset Button

Describes the function of the reset button on the indoor unit.

Remote Controller Operation Guide

Core Remote Controls

Explains basic buttons like power, mode, temperature, fan, and timer.

Advanced Features and Airflow

Covers special modes (Hi Power, Sleep, PURE, etc.) and airflow adjustments.

Remote Controller Display Indicators

Signal and Basic Status Indicators

Details indicators for signal transmission, operation mode, and temperature.

Advanced Operation Indicators

Explains indicators for special modes, memory, and sleep functions.

Initial Setup and Preparation

Remote Controller Battery Setup

Instructions for inserting and replacing remote controller batteries.

Setting the Remote Controller Clock

Guide on how to set the current time on the remote controller.

Remote Clock Adjustment

Initiating Clock Setting

Steps to begin the clock adjustment process using the CLOCK button.

Setting the Current Time

Details on how to adjust the time using the ON/OFF and SET buttons.

Remote Controller Usage Guidelines

Signal Reception and Placement

Advice on optimal placement and signal reception for the remote.

Remote Holder Installation

Instructions for mounting the remote controller holder.

Automatic Operation Modes

Auto Mode Functionality

How the unit automatically selects cooling, heating, or fan operation.

Auto Changeover Operation

Details on switching between cooling and heating based on temperature.

Cooling and Heating Modes

Performing Cooling/Heating Operations

Steps to start and stop cooling or heating modes.

Dry Operation Mode

Performing Dry Operation

Guide for using the dry mode for dehumidification.

8°C Heating Operation

Activating 8°C Heating Mode

Instructions for enabling the 8°C heating function for freeze prevention.

Stopping 8°C Heating Mode

Procedure to stop the 8°C heating operation.

Pure Operation Function

Activating and Deactivating Pure Mode

How to use the air purifying function.

Hi Power Operation

Setting and Cancelling Hi Power Mode

Guide for using the high-power mode for rapid cooling/heating.

Timer Settings

Setting ON and OFF Timers

Instructions for scheduling the unit's operation times.

Combined Timer Functions

Setting Sequential ON/OFF Timers

How to set both ON and OFF timers for continuous operation.

Daily Timer Activation

Enabling timers to repeat daily.

Storing and Recalling Settings

Saving Favorite Settings (MEMO)

Steps to store frequently used operation settings.

Recalling Saved Settings (MY COMFORT)

How to activate previously stored settings.

Airflow Direction Adjustment

Manual Airflow Direction Control

Adjusting vertical and horizontal louvers manually using FIX.

Automatic Swing Airflow

Enabling the automatic swinging motion of the louvers.

Automatic Restart Function

Setting Up Auto Restart

Procedure to enable the unit to restart after a power outage.

Cancelling Auto Restart

Steps to disable the automatic restart feature.

Air Conditioner Operational Logic

Automatic and Hi POWER Modes

Explains the logic behind automatic and high-power operations.

Sleep and Dry Modes

Details on how sleep and dry operations function.

Economical Operation Tips

Efficient Usage Strategies

Advice on maintaining comfort and saving energy.

Temporary and Cleaning Operations

Temporary Operation via Reset Button

Using the reset button for temporary control.

Understanding Cleaning Operation

Explains the purpose and duration of the cleaning cycle.

Routine Maintenance Guide

Cleaning Unit Surfaces

Instructions for cleaning the indoor unit and remote controller.

Long-Term Storage Preparations

Steps for maintenance when the unit is not used for extended periods.

Pre-Operation Checks

Essential checks before operating the unit.

Air Filter Cleaning

Procedure and importance of cleaning air filters regularly.

Air Filter Cleaning Steps

Opening the Unit Panel

How to open the front panel to access filters.

Filter Removal and Cleaning

Steps for removing, cleaning, and drying air filters.

Closing the Unit Panel

Instructions for properly closing the unit's front panel.

Performance Characteristics

Unit Protection and Heating Features

Explains protection features and heating characteristics.

Heating Capacity and Snow Management

Discusses heating capacity and considerations for snow.

Power Failure and Operating Conditions

Behavior during power failure and optimal operating temperatures.

General Troubleshooting

Critical Fault Indicators

Actions for critical error codes and flashing indicators.

Inoperative Unit Checks

Steps to check if the unit is not operating.

Performance Troubleshooting

Solutions for poor cooling or heating performance.

Troubleshooting Common Occurrences

Condensation, Noise, and Odors

Explains normal occurrences like condensation, noise, and smells.

Indicator Behavior and Frost

Addresses indicator lights, frost formation, and defrosting.

Airflow and Mist Phenomena

Explains airflow changes and mist generation.

Identifying Normal Sounds and Indicators

PURE Indicator and Panel Sounds

Issues related to the PURE indicator and moving panel sounds.

Indoor Unit Operational Sounds

Describes normal sounds from the indoor unit during operation.

Outdoor Unit Operational Sounds

Describes normal sounds from the outdoor unit.

Remote Controller Troubleshooting

Remote Control Functionality Issues

Solutions for when the remote controller is not working correctly.

Display and Signal Problems

Addresses issues with the display and signal reception.

Technical Specifications

Model Series Specifications (07/10)

Detailed technical data for RAS-07 and RAS-10 models.

Model Series Specifications (13/16)

Detailed technical data for RAS-13 and RAS-16 models.

Model Series Specifications (18)

Detailed technical data for RAS-18 models.

Performance Operating Conditions

Cooling Mode Conditions

Specifies the temperature and humidity ranges for cooling.

Heating Mode Conditions

Specifies the temperature and humidity ranges for heating.

EMC Directive Compliance

Manufacturer and Distributor Information

Details regarding the manufacturer and EU importer/distributor.

Related product manuals

Toshiba RAS-10PAVSG-E

6 pages

Toshiba RAS-10PKVSG-E

148 pages

Toshiba RAS-10PKVP-ND

114 pages

Toshiba RAS-10PKVPG-E

Toshiba RAS-10PAVP-ND User Manual

Table of Contents