Item
8. Louver control
1) Louver
position
Operation flow and applicable data, etc.
This function controls the air direction of the indoor unit.
Description
• The position is automatically controlled according to the operation
• The set louver position is stored in memory by the microcomputer,
The angle of the louver is indicated as the louver closes fully is 0°.
mode (COOL/HEAT).
and the louver returns to the stored position when the next operation
is performed. (Cooling/Heating memory position)
1) Louver position in cooling operation
Wide air direction
Wide-angle Right wide Left wide
Spot air direction
Spot front Spot
right Spot left
Initial setting of "Cooling storage position"
Louver : Directs downward (
40.9°)
To Next Page
Loading...
