Item
Operation flow and applicable data,etc
Description
2. Press
) is shown on remote controller display.
to rise or decrease the
brightness in 4 levels.
20. Display
lamp
brightness
adjustment
1. Press and hold
for 3 seconds until brightness level ( , ,
or
Remote control
LCD
Operation display
Brightness
Lamp illuminates full brightness.
100%
Lamp illuminates 50% brightness.
50%
Lamp illuminates 50% brightness and the operation lamp
is turned off.
50%
All lamps are turned off.
All turned off
and , the lamp illuminates for 5 seconds before
● In the examples of
going off.
FAN
To decrease the display lamp brightness or turn it off.
21.
Operation
mode
setectable
2.
1.
Purpose
Choosing the operating system as
appropriate in real condition
Operation
Factory default setting prefer
"Heat pump" system. Through it is
able to cooling only system heating
only system or return to factory
default.
Operating system setting
•
•
•
Do cut J804 for cooling only systemp
Do cut J805 for heating only systemp
Do cut both of J804 and J805 for return
to factory default.
J804
To Next Page
Loading...
