9-4. Remote control
9-4-1. Remote Controller and Its Functions
+
Set clock button (CLOCK)
,
Check button (CHECK)
-
Reset button (RESET)
● The provided Remote Controller is a wireless type, which also can be used as a wire. Please see
“How to Connect The Remote Controller for Wired Operation”, located in installation instruction, in
case of wired control is required.
● In wire operation, remote controller will return to initial condition
(PRESET,
TIMER and CLOCK will return to initial condition) when user shutdown power supply of
Air conditioner.
1
Infrared signal emitter
2
Start/Stop button
3
Mode select button (MODE)
4
Temperature button (TEMP)
5
Fan speed button (FAN)
6
Swing louver button (SWING)
7
Set louver Up-Down button (FIX X)
8
On timer button (ON)
9
Off timer button (OFF)
! Setup button (SET)
"
Clear button (CLR)
#
Memory and Preset button (PRESET)
$
AIR FLOW
selection
button (AIR FLOW)
%
High power button (Hi-POWER)
&
Economy button (ECO)
(
Set louver Left-Right button (FIX W)
)
Comfort sleep button (COMFORT SLEEP)
~
Filter reset button (FILTER)
Note:
9-4-2. Operation of remote control
1. AUTOMATIC OPERATION
To automatically select cooling, or fan only operation.
ress
MODE
1. Press
2. Press
: Select A.
: Set the desired temperature.
2. COOLING / HEATING / FAN ONLY OPERATION
To automatically select cooling, or fan only operation.
1. Press
2. Press
: Select Cool , Heat , or Fan only
Press : Set the desired tempera
Cooling / Heating : Min 17°C - Max 30°C, Fan Only: No temperature indication
MED+ : Select AUTO, LOW , LOW+ , MED ,
FAN
ess
HIGH
3. Press
HIGH
ress
MODE