6. Hi-POWER OPERATION
To automatically control room temperature and airflow for faster cooling or heating
operation (except in DRY and FAN ONLY mode)
PressPress : Start and stop the operation
7. ECO OPERATION
To automatically control room temperature to save energy (except in DRY and FAN ONLY mode)
Press : Start and stop the operation.
Note: Cooling operation; the set temperature will increase automatically 1 degree/
hour for 2 hours (maximum 2 degrees increase). For heating operation the
set temperature will decrease.
8. COMFORT SLEEP OPERATION
For comfortable sleep, automatically control air flow and automatically turn OFF (Except in DRY mode.)
1. Press
: Select 1, 3, 5 or 9 hrs for OFF timer operation.
Note: The cooling operation, the set temperature will increase automatically
1 degree/hour for 2 hours (maximum 2 degrees increase). For heating
operation, the set temperature will decrease.
2. Press : to cancel the comfort sleep operation.
9. HADA CARE FLOW AND AIR FLOW OPERATION
HADA CARE FLOW
Air f ow upward to the ceiling, provide Indirect air f ow to body and
homogenize room temperature.
AIR FLOW
Comfortable air f ow can select from this feature.
HADA CARE FLOW and AIR FLOW operation
Press
For start operation as sequence below
Cancel
Air Flow
Wide center
Spot left
Wide right
Spot right
Wide left
Spot center
HADA CARE FLOW
Note:
●
During HADA CARE FLOW mode, FIX and SWING button cannot active