– 41 –
4. DRY OPERATION (COOLING ONLY)
For dehumidification, a moderate cooling performance is controlled automatically.
1. Press : Select Dry .
2. Press : Set the desired temperature.
5. Hi-POWER OPERATION
To automatically control room temperature and airflow for faster cooling or heating operation
(except in DRY mode).
Press : Start and stop the operation.
6. ECO OPERATION
To automatically control room to save energy (except in DRY mode)
Press : Start and stop the operation.
Note: Cooling operation; the set temperature will increase automatically 1 degree/hour for 2 hours (maximum
2 degrees increase).
For heating operation the set temperature will decrease.
7. TEMPORARY OPERATION
In case of the misplaced or discharged remote control
• Pressing the TEMPORARY button, the unit can
start or stop without using the remote control.
• Operation mode is set on AUTOMATIC operation,
preset temperature is 24°C and fan operation is
automatic speed.
8. TIMER OPERATION
Daily timer allows the user to set both the ON & OFF timers and will be activated on a daily basis.
Setting Daily Timer
• During the daily timer is activation, both arrows ( or )are indicated.
Note:
• Keep the remote control in accessible transmission to the indoor unit;
otherwise, the time lag of up to 15 minutes will occur.
• The setting will be saved for the next same operation.
Setting the ON Timer Setting the OFF Timer
1
Press : Set the desired ON timer. Press : Set the desired OFF timer.
2
Press : Set the timer Press : Set the timer.
3
Press : Cancel the timer Press
1
Press : Set the ON timer.
3
Press .
2
Press : Set the OFF timer.
4
Press : button during the ( or ) mark flashing.
MODE
Hi POWER
TEMPORARY
button
To Next Page
Loading...
