– 40 –
9-4. Remote control
9-4-1. Remote control and its functions
1 Infrared signal emitter
2 Start/Stop button
3 Mode select button (MODE)
4 Temperature button (TEMP)
5 Fan speed button (FAN)
6 On timer button (ON)
7 Off timer button (OFF)
8 Setup button (SET)
9 Clear button (CLR)
0 Memory and Preset button (PRESET)
! One-Touch button (ONE-TOUCH)
@ High power button (Hi-POWER)
# Economy button (ECO)
$ Quiet button (QUIET)
% Comfort sleep button (COMFORT SLEEP)
^ Set clock button (CLOCK)
& Check button (CHECK)
* Reset button (RESET)
Note:
When pushing the “SWING”, “FIX” and
“FILTER” buttons, indoor unit does not operate
and the receiving beep sound also not appear.
9-4-2. Operation of remote control
1. ONE-TOUCH
Press the “ONE-TOUCH” button for fully automated operation that is customized to the typical consumer
preferences in your region of the world. The customized settings control temperature air flow strength, air flow
direction and other settings to provide you alternate contact with “ONE-TOUCH” OF THE BUTTON. If you
prefer other settings you can select from the many other operation functions of your Toshiba unit
Press : Start the operation.
2. AUTOMATIC OPERATION
To automatically select cooling, or heating operation.
1. Press : Select A.
2. Press : Set the desired temperature.
3. COOLING / HEATING OPERATION
To automatically select cooling, or heating operation.
1. Press : Select Cool , or Heat .
2. Press : Set the desired temperature.
3. Press : Select AUTO, LOW , LOW+ , MED , MED+ , or HIGH .
ONE-TOUCH
MODE
MODE
FAN
To Next Page
Loading...
