– 68 –
No.
1
Part name
Front panel
Procedures
3) Push “PUSH” part under the front panel and
remove hooks of the front panel from the
installation plate.
Remarks
Push
Front panel
Installation plate
2 Screws
4 screws
4 hooks
4) Remove the front panel fixing screws.
(4 pcs.)
5) Take off 4 hooks of panel from rear side.
<How to assemble the front panel>
1) Push 3 center positions and 2 lower center
positions of the air outlet, and then hang
the hanging hooks (4 pcs.) at the top side
of the front panel to the rear plate.
2) Tighten four screws.
• Incomplete hanging or incomplete
pushing may cause a dewdrops or
generation of a fluttering sound.
To Next Page
Loading...
