Toshiba RBC-AMS51E-ES - Backlight; Key Lock

– 15 –
Lite-Vision plus Remote Controller
Installation Manual
4. Backlight
Turn on or off the back light of the LCD.
5. Key lock
Select whether to lock / unlock [ON / OFF], [ ], [MODE](F1) and [FAN SPEED](F2).
1 Push the [ ∧ ] / [ ∨ ] button to select
“4. Backlight” on the “Initial setting” screen,
then push the “ Set” [
F2]
button.
2 Push the [ ∧] / [ ∨ ] button to select
“ON” or “OFF”.
3 Push the [ MENU] button.
ÆWhen “ON” is selected, the back light is turned
on during operating with the remote controller.
ÆW
hen “OFF” is selected, the back light is not
turned on.
NOTE
The back light of the LCD is turned on as factory default.
1 Push the [ ∧ ] / [ ∨ ] button to select
“5. Key lock” on the “Initial setting” screen,
then push the “ Set” [
F2]
button.
2 Push the [ ∧] / [ ∨ ] button to select
a key to lock / unlock.
3 Push the “ ←z” [ F1] button
to select “Lock”, or “
z→” [
F2] button to select “Unlock”.
4 Push the [ MENU] button.
ÆWhen "Lock" is selected, the key cannot be
used during key lock.
When "Unlock" is selected, the key can be used
eve
n during key lock.
ÆAll keys ar
e unlocked while “Check” is
displayed.
ÆFor the key lock setting, refer to the owner’s
manual.
ÆThe
factory default is "Lock".
Initial setting(1/2)
1.Clock
2.Name of room
3.Screen contrast
4.Backlight
5.Key lock
Set
Return
Set
Backlight
ON
OFF
Return Fix
Initial setting(1/2)
1.Clock
2.Name of room
3.Screen contrast
4.Backlight
5.Key lock
Set
Return
Set
ON/OFF
Set temp.
Lock / Unlock
Lock / Unlock
Key lock(1/2)
Return Fix
Mode
Fan speed
Lock / Unlock
Lock / Unlock
Key lock(2/2)
Return Fix
+00EH97062701_00EN.book Page 15 Thursday, March 17, 2011 5:29 PM