– 25 –
Lite-Vision plus Remote Controller
Installation Manual
Checking the model name or serial number
The model name or serial number to be displayed on the Ou
tdoor (Indoor) model name or Outdoor (Indoor) unit
serial No. screen is displayed.
3. Alarm history
List of latest 10 alarm data: error information of check code, date, time, and unit, is displayed.
Deleting the alarm history
1 Push the [ ∧ ] / [ ∨ ] button to select
“3. Alarm history” on the “Field setting
menu” screen, then push the “
Set” [
F2] button.
List of latest 10 Alarm data is displayed.
* The oldest data are deleted in order to record
th
e new ones.
ÆThe
date and time when the error occurred for
the first time is displayed for the repeated alarm.
1 Push the “ Reset” [ F2] button
while the list of alarm
history is displayed.
2 Push the “ Yes” [ F1] button
after the confirmation screen is displayed.
ÆDelete the alarm history in each remote
controller when the dual remote controller
system is used.
1.Manual model name input
2.Model name selection
Outdoor model name
RAV-SP1104AT8-E
Outdoor model name
Return
Set
Fix
1.Test mode
2.Register service info.
3.Alarm history
4.Monitor function
5.DN setting
Field setting menu
Return
Set
Unit Code Date Time
1. 1–2 E04 31/12/2010 12:25
2. – – – –
3. – – – –
4. – – – –
Alarm history
Return
Reset
Return
Reset all alarm data.
NoYes
Alarm history
B3
Yes
+00EH97062701_00EN.book Page 25 Thursday, March 17, 2011 5:29 PM
To Next Page
Loading...
