– 4 –
Lite-Vision plus Remote Controller
Installation Manual
EN
Installation
Requirements to install the remote controller
◆ Installation place
• Install the remote controller at a height of 1 to 1.5 m from the floor so that the average temperature in the room
can be detected.
• Do not install the remote controller in a place exposed to direct sunlight or
direct outside air, such as the side of
a window.
• Do not install the remote controller in a place behind someth
ing or to the rear side of an object, where air flow is
not sufficient.
• Do not install the remote controller in a freezing box or refrig
erator, as the remote controller is not waterproof.
• Install the remote controller vertically to the wall.
◆ Installation dimension
+00EH97062701_00EN.book Page 4 Thursday, March 17, 2011 5:29 PM