Learning the Basics
Using the CD-ROM Drive
92
Placing the compact disc in the drive
3 Check the compact disc to make sure it is free of dust
before inserting it.
4 Carefully place the compact disc in the drive (with the
label facing up).
Positioning the compact disc on the spindle
5 Gently press the
compact disc
onto the center
spindle
until
you feel it click into place.
Make sure the disc is completely on the spindle and is lying
flat.
6 Push the CD-ROM tray in by pressing gently on the center
of the tray until it clicks into place.
You’re ready to use the CD-ROM.
Before moving the computer, even just across the room,
remove the CD-ROM from the drive and place it in a safe
place where it will not be damaged.
Correct position
Incorrect positions
Compact disc
Spindle
To Next Page
Loading...
