4 Replacement Procedures 4.4 HDD
4.4 HDD
Removing the HDD
CAUTION: Do not press on the top or bottom of the drive.
Applying such pressure can either corrupt the data in the drive or
damage the drive.
Remove the HDD (hard disk drive) according to the following procedures and Figures 4-5, 4-
6.
1. Release the two HDD cover screws securing the HDD cover.
2. Remove the HDD cover.
3. Removing the M2x3 black flat head screw.
HDD cover
HDD cover
secure screw
HDD
M2x3 black flat head screw
Figure 4-5 Removing the HDD pack
4-16 Satellite/Satellite Pro/A500/A505/A507/dynabook Maintenance Manual
To Next Page
Loading...
