4.23 FL Inverter Board 4 Replacement Procedures
4.23 FL Inverter Board
Removing the FL Inverter Board
Remove the FL inverter board according to the following procedures and Figures 4-38.
1. Remove one M2.5x4 black flat head screw.
M2x3 black flat head screw
M2 5x4 black flat head screw.
FL inverter board
LCD FL cable
HV cable
FL inverter board bracket
Figure 4-38 Removing the FL inverter board
2. Lift the LCD module, FL inverter board and disconnect the LCD/FL cable from the
LCD/FL connector.
3. Disconnect the HV cable from the HV connector and remove the FL inverter board.
4. Remove one M2x3 black flat head screw and remove the FL inverter board bracket.
Satellite/Satellite Pro/A500/A505/A507/dynabook Maintenance Manual 4-63
To Next Page
Loading...
