Toshiba Satellite A500 - Installing the LED Board

4.15 LED Board 4 Replacement Procedures
Satellite/Satellite Pro/A500/A505/A507/dynabook Maintenance Manual 4-41
Installing LED Board
Install LED Board to the following procedures and Figure 4-20.
1. Connect the LED flat cable to CN9500 on the LED board.
2. Seat the LED board in the correct position.
3. Secure the USB cable with one M2.5x3.5 white flat head screw.
4. Seat the USB cable in the correct position.
5. Connect the LED flat cable to CN202 on the system board.