4 Replacement Procedures 4.6 Keyboard
4.6 Keyboard
Removing Keyboard
Remove the Keyboard according to the following procedures and Figure 4-9.
1. Release the following 14 latches on the keyboard cover, in that order:
- One latch on right sides.
- Seven bottom latches.
- Six front latches.
2. Remove the keyboard cover.
3. Remove four M2.5x2.5 black flat head screws.
4. Disconnect the keyboard cable from CN13 and CN203 on the system board.
5. Remove the keyboard.
Keyboard cover
Keyboard
M2 5x2 5
black flat screw
..
CN13
Latch
CN203
Figure 4-9 Removing the keyboard
4-22 Satellite/Satellite Pro/A500/A505/A507/dynabook Maintenance Manual
To Next Page
Loading...
