Toshiba Satellite A50S Series - Page 216

3.31 SETUP 3 Tests and Diagnostics
3-106 [CONFIDENTIAL] Satellite A50S/TECRA A3X Maintenance Manual (960-534)
NOTE: When using Windows, the setting of “Toshiba HW setup” is enabled and the
setting of “Parallel Port Mode” is disabled.
15. LEGACY EMULATION
(a) USB KB/Mouse Legacy Emulation
This option sets the Legacy support condition of the USB keyboard and the USB
mouse.
Enabled
Enables LEGACY support. (Default)
USB keyboard/USB mouse are available without the driver.
Disabled Disables LEGACY support
(b) USB-FDD Legacy Emulation
This option sets the Legacy support condition of the USB floppy disk drive.
When a computer is FDD built-in model, this option is not displayed.
Enabled Enables LEGACY support. (Default)
USB floppy disk is available without the driver.
Disabled Disables LEGACY support
(c) USB Memory BIOS support Type
This option sets the priority of the USB memory as a startup device.
HDD Sets the priority of the USB memory to be equivalent to the HDD.
(Default)
FDD Sets the priority of the USB memory to be equivalent to the FDD.
16. PCI LAN
This option sets the Enable / Disable of the built-in LAN functions.
Enabled Enables built-in LAN functions. (Default)
Disabled Disables built-in LAN functions.