Toshiba Satellite A50S Series - PC Card

4 Replacement Procedures 4.2 Battery Pack/PC Card
4.2.2 PC Card
Removing the PC card
The following describes the procedure for removing a PC card (See Figure 4-2).
CAUTION: Insert or remove the PC card in accordance with any instructions in the
PC card manual or the manuals of the computer system you are using.
1. Push the eject button. It will pop out when you release it. Then press the eject button
once more to eject the PC card.
2. Grasp the PC card and remove it.
PC Card
Eject Button
Figure 4-2 Removing PC Card
Installing the PC card
The following describes the procedure for inserting a PC card (See Figure 4-2).
1. Make sure the eject button does not stick out.
2. Insert the PC card and press it until it is securely connected.
4-10 [CONFIDENTIAL] Satellite A50S/TECRA A3X Maintenance Manual (960-534)