Toshiba Satellite A50S Series - 4.7 Cooling Fin and CPU

4.7 Cooling Fin/CPU 4 Replacement Procedures
4.7 Cooling Fin/CPU
Removing the Cooling fin/CPU
The following describes the procedure for removing the cooling fin/CPU (See Figure 4-11 to
4-14).
1. Remove the following screws fixing the CPU cover and remove the CPU cover.
• M2.5x14B THIN BIND screw x1
• M2.5x18B THIN BIND screw x1
M2.5x18B THIN BIND
M2.5x14B THIN BIND
CPU Cover
Figure 4-11 Removing CPU Cover
Satellite A50S/TECRA A3X Maintenance Manual (960-534) [CONFIDENTIAL] 4-21