4  Replacement Procedures   4.22  Wireless LAN Antenna/Speaker/Hinge 
4.22 Wireless LAN Antenna/Speaker/Hinge 
Removing the Wireless LAN antenna/Speaker/Hinge 
The following describes the procedure for removing the wireless LAN antenna, speaker and 
hinge (See Figure 4-44 to 4-52). 
1.  Peel off eight glass tapes securing the wireless LAN antenna cables (white and 
black). Remove the wireless LAN antennas. Turn the display assembly face down 
and unhook the wireless LAN antenna cable from the guides. 
[If Sharp–made LCD is installed] Remove two sponges from the display assembly. 
[If LG Philips–made LCD is installed] Remove one gasket and two aluminum tapes 
from the display assembly. 
 
[Samsung-made LCD] 
 
Glass Tape 
Wireless LAN 
antenna cable  
Glass Tape 
Glass Tape 
Wireless LAN antenna
4-62                [CONFIDENTIAL]            Satellite A50S/TECRA A3X  Maintenance Manual (960-534)