Toshiba Satellite A50S Series - 4.12 Sound Board

4 Replacement Procedures 4.12 Sound Board
4.12 Sound Board
Removing the Sound Board
The following describes the procedure for removing the sound board (See Figure 4-26).
1. Unlock the connector and disconnect the sound board cable from the connector of
CN9510 on the sound board.
2. Remove the following screw to remove the sound board.
3. Unlock the connector and disconnect the sound board cable from the connector
CN9500 on the system board
• M2.5x4B THIN BIND screw x1
M2.5x4B THIN BIND
Sound Board
Sound Board Cable
CN9500 CN9510
Figure 4-26 Removing Sound Board
Installing the Sound Board
The following describes the procedure for installing the sound board (See Figure 4-26).
1. Connect the sound board cable to the connector CN9510 on the sound board.
2. Install the sound board on the base assembly and secure it with the following screw.
• M2.5x4B THIN BIND screw x1
3. Connect the sound board cable to the connector CN9500 on the system board.
4-38 [CONFIDENTIAL] Satellite A50S/TECRA A3X Maintenance Manual (960-534)