Toshiba Satellite A50S Series - 4.11 Display Assembly

4 Replacement Procedures 4.11 Display Assembly
4.11 Display Assembly
Removing the Display assembly
The following describes the procedure for removing the display assembly (See Figure 4-23 to
4-25).
1. Close the display and turn the computer face down.
2. Remove the following screws from the bottom of the computer.
• M2.5x6B THIN BIND screw x9 (“6” in the figure)
• M2.5x14B THIN BIND screw x5 (“14” in the figure)
• M2.5x18B THIN BIND screw x1 (“18” in the figure)
14
6
6
14
14
6
6
14
18
6
6
6
6
14
6
Figure 4-23 Removing the scerws on the bottom
4-34 [CONFIDENTIAL] Satellite A50S/TECRA A3X Maintenance Manual (960-534)